SP001S Space Capsule House

A high-end modular building with a streamlined shape, panoramic floor-to-ceiling windows, a smart home system and a luxury interior, suitable for camping, resorts, hotels and private homes.

They depend on the model: SP001 is 5600 × 3000 × 3200 mm with 18 m²; SP003 is 8500 × 3300 × 3200 mm with 28.0 m²; SP005 is 11500 × 3300 × 3200 mm with 38 m²; SP-D1 is 9600 × 3300 × 3200 mm with 32 m². Choose by occupancy and layout — SP001 and SP003 are two-person units (SP003 adds a bar counter and balcony) and SP005 takes two to four people. Also check that the transport route, crane position and foundation area match the model.

Standard: galvanised steel frame, aluminium exterior panels, PU insulation, interior wall and ceiling panels, bathroom, whole-house lighting and wiring, water heater and air conditioner. Smart voice control and a kitchen are optional. When comparing quotes, check item by item what each price includes.

Some models allow changes to the layout and interior, including beds, seating, desk, storage, bathroom type, colours, finishes, appliances and smart controls; a kitchen or bar counter is only possible on models where the space and water, power and ventilation allow. The main frame, bathroom position and pipe routes limit what can change — the confirmed floor plan and configuration list are final.

They suit resorts, glamping sites, eco-lodges and boutique hotel rooms. The shell, interior and equipment are completed in the factory, so on site the work is mainly unloading, positioning and connecting water and power. The project needs road access, lifting equipment, a foundation and local approvals.

It ships as a complete large unit and normally needs a truck crane to unload on site. Road transport uses semi-trailers and sea freight uses flat racks, secured at the designated lifting points; moving parts and separately shipped accessories are packed on their own. The transport plan must be customised to each model's size, weight and lifting points — it cannot be copied from another model.

Before arrival, complete a level foundation or support points, confirm that trucks and cranes can reach the site and have room to set up and unload, and reserve water supply, drainage, power, earthing and network connections according to the model's drawings. After arrival the unit is lifted into position and checked, connected to water, drainage, power and earthing, fitted with the steps or equipment shipped separately, and then pipes, circuits, lighting and equipment are commissioned. Support points and connection positions differ between models, and lifting, electrical and plumbing work should be carried out by personnel with the relevant qualifications.

Clean the exterior surfaces, seals, drains and installed equipment regularly; check the sealant on glass, doors, windows and panel joints and repair any damage before water gets in. Clear the roof and drains, and check locks, hardware, anti-corrosion coatings and pipework for leaks. Service the air conditioner and water heater as their manuals require, and have electrical protection and earthing checked by a qualified person.