FAQ

Yes. Send us the site plan, intended use, occupancy and local climate requirements, and our engineering team will propose a module combination, layout and specification to suit. Turnkey packages can cover design, production, shipping documents and installation guidance.

Store them on level, dry ground, away from prolonged damp and direct sunlight, so that panels, seals and hardware stay in good condition.

Clean the exterior surfaces regularly, check and tighten bolts, and re-seal joints and worn areas with silicone to prevent corrosion and leaks.

A modular house that is transported folded and expands sideways on site, reaching a width of up to 6.3 m when open. It is used for homes, showrooms, shops and hotels.

Five models: EXH700, EXH10, EXH20, EXH30 and EXH40, with expanded outside dimensions of approximately 5.9 × 4.8 m, 2.95 × 6.3 m, 5.9 × 6.3 m, 9 × 6.3 m and 11.8 × 6.3 m; the folded transport width is about 2.2 m. The 20 ft and 30 ft models take 1–3 bedrooms and the 40 ft takes 1–5 bedrooms, all including a living area and bathroom. Transport is planned with the folded dimensions and site planning with the expanded dimensions.

Reference loads: 6 × EXH700, 4 × EXH10, 2 × EXH20, 1 × EXH30 and 1 × EXH40. Extra doors, glazing, cladding, cabinets or a terrace change the packing arrangement, so confirm freight and unloading space against the final configuration.

Standard: galvanised steel frame, 50 mm EPS roof panel, 75 mm EPS exterior wall panels, 50 mm EPS partition panels, aluminium sliding windows, thermal-break aluminium entry door, dry/wet separated bathroom, steel bedroom doors, 220 V/50 Hz electrics with lighting, sockets, air-conditioner socket and RCD, and an L-shaped kitchen cabinet. Optional: upgraded cabinets, windows and doors, exterior cladding, wood-grain or UV-coated wall panels, flooring, pitched roof and balcony.

EPS is standard: 50 mm in the roof, 75 mm in the exterior walls and 50 mm in the partitions. Mineral wool and polyurethane cores are also available — please specify both the core material and the panel thickness.

Within the chosen size and folding structure you can change the number of bedrooms, whether the kitchen is open or separate, how the bathroom is used, and the storage, furniture, door and window positions, and you can choose the interior and exterior finishes. The central structure and folding sections determine where partitions, openings and services can run; unusual layouts are adapted to the folding mechanism.

Yes. Australian, European, American, British, Italian, Indonesian and other standards can be configured. Please provide the destination country, voltage, frequency, plug type and high-load appliances such as air conditioners and water heaters. Local connection and earthing must be carried out by a licensed electrician; component selection does not replace the local electrical approvals a building requires.

Yes — units can be joined and the range includes two-storey solutions. The foundation, frame connections between units, internal openings, stairs and railings, roof and joint waterproofing, and services must all be designed together. A single-unit installation drawing is not enough for a joined or two-storey building; confirm the full layout and number of storeys before production, and local structural and building approvals may be required.